How to edit broadcast highlights and quickly find only the moments that happened

If you always miss the moment after the broadcast is over and think, "Oh, I should have uploaded that scene as a short," the cause is not your editing skills. In a 6-hour replay, all the time is wasted trying to find a section to write about. The key to quickly finding highlights is not just to scan the audio shouts, but also to look at chat and where the star balloons and cheese reactions exploded. We will go over the method, actual editing sequence, and tool selection criteria one by one.

Editing broadcast highlights, why does it take so long?

The real problem is that ‘finding the section to use’ takes longer than the editing itself. If you watch the 3-6 hour broadcast again and search through your memory for the moments that happened, you actually only have a short amount of time to refine the cuts, but half a day is lost in the previous steps. If you are exhausted after the broadcast, it is difficult to even open the replay.

First, check with your own eyes where time is leaking.

Hidden Time Thief Checklist (approx. based on one edit)

• Replay loading, scrubbing to find sections: The biggest thief, usually proportional to broadcast length
• Recalling “that scene at that time”: If it’s unclear, go back and forth several times.
• Trimming the front and back of the rough cut: Once the section is decided, it is surprisingly quick.
• Add subtitles: Dozens of minutes per clip by hand
• Creating a title and thumbnail: Steps that become longer after worrying about it
• Encoding, upload: Time to render and wait

In my experience, more than half of the editing is done through 'Find' and 'Subtitles' rather than 'Cut'. So, if you reduce these two places, the overall time will be significantly shortened.

How do you find the ‘true moment’? What you miss if you only watch the audio

Many automatic tools only capture highlights as 'the moment the sound gets louder'. However, in Czizyk and SOOP, the scenes that really exploded are often where the streamer quietly made a comment, but the chat was flooded with star balloons and cheese. If you only use shouts as a criterion, you will miss these ‘quiet moments’ entirely.

If you look at the signals one by one, it becomes clear why you need to look at them all together.

If you only look at one signal, blind spots will inevitably occur. The point where the chat suddenly speeds up and the cheese comes in at the same time is almost certainly a highlight, but the audio reference tool just skips this point because it's quiet. Therefore, a method of overlapping ‘points where multiple signals bounce at the same time’ is needed.

What is the order of making highlight shorts with Chzzk and SOOP replay?

If you are making it for the first time, just knowing the order will take away half of the confusion. The entire flow is largely divided into six steps.

1. Securing replay: Chzzk and SOOP prepare VOD for the broadcast. If you want to delete it, download the original first (for storage settings and backup methods, refer to Summary of Chzzk Replays).
2. Segment Selection: Candidates are selected based on the areas where chatting and donations are concentrated. Saving time at this stage is key.
3. Rough Cut: Cut the candidate section back and forth a little loosely. You have to have context to make yourself laugh every second.
4. Subtitles and Title: Add subtitles to key lines and give them searchable titles.
5. Vertical/Horizontal Render: Divide 9:16 for shorts and 16:9 for clips according to purpose.
6. Upload: Post it on YouTube Shorts, etc. and watch the reaction.

The ‘just check this’ point at each stage is as follows. When selecting a section, check whether the starting point of the cut does not cut off the introduction of laughter, whether search terms such as the streamer name or game name are included in the subtitles, and whether faces or key scenes are cut out from the vertical video when rendering. If you follow just these three things, the level of completion will increase noticeably.

Vertical shorts (9:16) and horizontal clips (16:9), what should I make?

The answer is not to choose just one, but to ‘split one scene into two formats.’ Vertical shorts are suitable if you are aiming for an influx of people, and horizontal clips are suitable if you are aiming for an archive that fans will flock to. The scenes and lengths that suit each format are different, so if you set a standard, you can make a faster decision.

How many will be picked from a broadcast depends on the broadcast length and density. There is less burden by first creating 3 to 5 vertical scenes focusing on scenes that clearly exploded, and then expanding the ones that received the best response horizontally. If you set 10 goals at a time from the beginning, you will often get exhausted and not be able to post even a single one.

Free editing program vs. AI automatic editing, which is right for me?

There is no set answer, it depends on your time, budget, and the range of moments you can afford to miss. If you compare without exaggeration the free editing that is done by hand, the automatic audio detection that captures only the sound, and the AI ​​editing that even reads the chat and done, this is what it looks like.

Free programs don't cost money, but you have to change time, and the automatic audio detection is fast, but structurally misses the 'quiet moment'. Acting as an editor is certain, but it is expensive to entrust it to each broadcast with a follower base of 50,000 to 30,000 (the market price is provided separately in Short-form editing outsourcing price list ).

If it is a broadcast where screen changes are barely noticeable as a signal, the calculation is different. Virtuber broadcasts are like that, and there is a separate summary in VTuber Shorts Edit]. How to use star balloons and ad balloons from SOOP broadcasts as editing points is covered in SOOP Replay Highlights.

The third way to read chat and done as signals is ClipSpray. It analyzes the replay from beginning to end, selects the moments when the four signals in the table above overlap, and creates 9:16 vertical shorts and 16:9 horizontal clips with subtitles and titles (Function Summary).

Can I trust the automatically selected highlights? How to leave editing grounds

Just because you picked it automatically doesn't mean you should close your eyes and pick it up. Rather, if you can check ‘why this scene was selected’ in one line, the review process goes much faster. If each candidate has a basis, the decision to filter out ambiguous cuts and select only the clear ones can be made in a matter of seconds.

It is a good idea to leave the evidence on the timeline like this.

• 01:42:10: Chat speed +320%, shout volume peak → Vertical shorts recommended
• 02:15:33: Simultaneous influx of 50,000 cheese, streamer reaction → Vertical shorts recommended
• 03:48:02: That chat cider comment, dominating the chat → Horizontal clip recommended

If the reason for selection remains like this, there is no need to look back later and ask, ‘Why did you choose this scene?’ Not only does the inspection speed become faster, but the clip batting average itself increases because you are judging by numbers rather than feel when filtering out ambiguous cuts.

Broadcast highlight editing, start like this from today’s broadcast

There is no need to start grandiosely. You can get a feel for the next broadcast by processing it in the order below.

1️⃣ Secure replay: Back up the original VOD before it disappears

2️⃣ Reaction signal scan: Chat speed, only sections where star balloons and cheese overlap are marked as candidates

3️⃣ 3~5 vertical first: Only scenes that clearly exploded will be made to 9:16, and only those with good response will be expanded to 16:9

YouTube Shorts also provides view-based revenue distribution through the Partner Program. If you continue to accumulate secondary content once you have created the highlights, you will have another channel for inflow and profit outside of broadcasting. The issue of which platform to export the created clip to and with what title is covered in Shorts Upload Strategy].

Frequently Asked Questions

Are there any copyright issues if the BGM played during the broadcast is included as is?

If the sound source played on the broadcast is included as is, there may be a copyright issue in the secondary upload. It is safer to avoid music sections in the clip or replace it with copyright-safe BGM.

Can I display the name of the Star Balloon and Cheese sponsor in the clip?

Make sure that the nickname that appears in the sponsorship notification does not remain in the subtitles. It may be sensitive, so we recommend hiding the name.

How many highlights per day is appropriate?

Consistency is more important than quantity. The rhythm of uploading 3 to 5 vertical shorts that are clearly busted first and then expanding only those that respond well to horizontal clips never gets tiring.

Do I need to back up my replay before deleting it?

VOD may disappear after a certain period of time, so secure the original first. Once deleted, there is no way to retrieve highlights from that broadcast.

Source

• YouTube Customer Center (Shorts Revenue Distribution)
• CHZZK
• SOOP (Forest, Old Afreeca TV)